XP95 Manual Call Point – Isolating 55100-908APO

Description

55100-908APO

The XP95 Manual Call Point is used to manually initiate an alarm signal on the fire detection system.

  • EN 54-11 & EN 54-17 Certified
  • Reports an alarm in under 0.2 seconds
  • ‘Plug and Play terminal connections for faster wiring
  • Continuity link for wiring test before commissioning
  • Suitable for semi flush or surface mounting
  • XP95 & Discovery compatible
  • Not available for the UK market

Additional Information

General
Warranty  :  10 year
Mechanical
Colour  :  Red
Weight  :  151g
Materials housing  :  Polycarbonate
                            ABS
Product length  :  93mm
Product width  :  89mm
Product depth  :  26.5mm
Detection principle  :  Operation of a switch.
Product length  :  3.66in
Product width  :  3.5in
Product depth  :  1.04in
Conformance
Standards  :  EN 54-17
Approvals  :  LPCB
              CPR
Electrical
Protocol voltage (max)  :  9V
Protocol voltage (min)  :  5V
Protocol voltage  :  5 to 9V peak to peak
Power-up surge current  :  1mA
Maximum power-up time  :  1 second
Quiescent current  : 100μA
Quiescent current tested at  :  24V dc
Environmental
Humidity (max)  :  95% RH
Humidity (min)  :  0% RH
Humidity  :  0% to 95% (no condensation or icing)
Humidity Note  :  no condensation or icing
Operating temperature (min)  :  -20°C
Operating temperature (max)  :  60°C
Operating temperature  :  -20 to 60°C
IP rating Value  :  IP24
Storage temperature (min)  :  -30°C
Storage temperature (max)  :  80°C
Storage temperature  : -30 to 80°C
Operating temperature  :  -4 to 140°F
Operating temperature (max)  :  140°F
Operating temperature (min)  :  -4°F

You May Also Like This

Intrinsically safe Detector & Device
Intrinsically safe Detector & Device
Intrinsically safe Detector & Device
Intrinsically safe Detector & Device
Intrinsically safe Detector & Device